R134a DC Mini Compresor Giratorio Sistemas de Refrigeración Congelador Aire Acondicionado Refrigeración de Bebidas Médicas - Coche Yachet Camping

SPECIFICATION Motor Type:BLDC Permanent Magnetic Motor Pole/Phase No.:10 Pole 5 Phase Magnetic Type:NdFeB Insulation Class:E CATEGORY (Insulation Material PPS or PBT) Winding Resistance (L-L):0.51(20℃) Ω Operation Inverter:Driver, D.C. voltage 48V Voltage:BLDC, DC 48V (Driver input) Starting voltage:35V Hydrostatic strength test (Low):Strength pressure 7.45MPa (76㎏/㎠) Hydrostatic strength test (High):Strength pressure 16.2MPa (165㎏/㎠) Residual moisture / Residual impurities:500mg Max / 500mg Max Insulation Resistance:20 MΩ min. (with 200V D.C mega tester) Withstand Voltage:1800V-1sec(1250V-1min) Leakage current is less than 2.5mA ACCESSORY PARTS LIST ※Controller*1 ※Rubber mat*3 ※GROMMET SLEEVE*3 ※Screw of Compressor*3 ※Washer of Compressor*6 Please in strict accordance with the drawings requirements and fittings required to install the compressor. INSTALLATION & APPLICATION 1.General ※Avoid installing the compressor in apparatus using refrigerants containing chlorine, such as R12, R22, R502, etc. Don't use filling devices that have been used for CFC or HCFC refrigerants before when filling the refrigerant. ※Don't use cleaning agents containing chlorine for cleaning circuits. Make sure that there is no residual chlorine left if they have to be used. Special attention: The content of chlorine related substances in refrigerating systems must be below 100 PPM of the total refrigerant gas filled. ※Use specified drying filters for HFC-134a only. Install the filters right after the sealing package is opened. ※Tubing used in systems must be clean and free from residual oil left from the manufacturing process. See the COMPRESSOR DRAWING LIST for more information.

• 🚚 Envío rápido
• 🔒 Pago seguro
• 🛡️ Garantía incluida
• 💬 Soporte por WhatsApp