Pressure Pumps,115V60Hz 1 inch Outlet 120W Water Pressure Booster Pump,Automatic Household Shower Booster Pump with Water Flow Switch for Home

Application:It applies to duplex apartments,suburban villas,high-rise buildings with low water pressure,kitchens,bathrooms,water heaters pressurized,household water pressurized,and solar water heaters pressurized.It is suitable for water heater pipe pressurization with insufficient water pressure to prevent the water supply from being cold.How to Install:1.Wrap sealing tape(not included) around the inlet,add a gasket,and screw on the adapter.2.Wrap sealing tape(not included) around the outlet,add a gasket,and screw on the water flow switch.3.Connect the water inlet to the water pipe(not included).4.Connect the water outlet to the water heater water pipe(not included).5.After fixing the pump,make sure it is installed correctly,then turn on the power and use it.Specifications:Color: GreenModel: 15GR-15Process: Bake PaintAssembly Required: YesPlug Type: US StandardMotor Type: Copper Core MotorMaterial: Copper, Aluminum, Iron, PlasticProtection Level: IP45Current: 1.1APower: 120WVoltage: 115VFrequency: 60HzRotate: 3460r/minCapacitance: 15μFMax Head: 15m/49.2ftMax Flow: 25L/min/396GPHMax. Water Pressure: 1.5bar/21.7PSIInsulation: BNoise: 30-50dBMax. Water Temperature Range: 80-100℃/176-212℉Power Cord Length: 1m/3.28ftProduct Height: 19.5cm/7.68inchPump Body Diameter: 7.5cm/2.95inchTotal Length: 21cm/8.26inchConnection Size: G3/4"Outlet Diameter: 1"Packaging Size: 24*20*12cm/9.45*7.87*4.72inchGross Weight: 3.8kg/8.38lbsNet Weight: 3.55kg/7.83lbsPackage Included:1*Water Pressure Booster Pump1*Water Flow Switch1*English ManualOther Needed AccessoriesNotes:1. Water pipes are not included in this package.Before purchasing,please check the water pressure at home.If the water pressure at home is greater than the booster pump, the boosting effect will not be achieved.2. When the pump leaves the factory,a small amount of water may remain in the pump.This is due to strict tests on the pump to ensure quality and meet the testing standards.This does not mean that the pump has been used.3. Please strictly follow the instructions for installation and use,and pay attention to electrical installation specifications.Before use,please carefully check the cables,power supply,etc.,and take protective measures to avoid safety hazards.We suggest that professionals install this product.4. It is forbidden to install it upside down to prevent water from leaking into the motorwhich may cause a short circuit and burn the motor.5. When installing the water flow switch,place the cover face of the water flow switch facing upwards and make sure to tighten the movable joint next to the water flow switch.Once the water flow switch is turned,the internal screws may become loose due to compression, causing water leakage.Therefore, be sure to tighten the water flow switch! But please do not tighten the live connector too much to prevent the gasket inside from being broken and the screws on the side of the water flow switch from being broken.

• 🚚 Envío rápido
• 🔒 Pago seguro
• 🛡️ Garantía incluida
• 💬 Soporte por WhatsApp